Table of Contents
Advertisement
1
Introduction
This user manual is tailored for the DW IP Phone, which will explain the keypad instructions, web configurations,
and Telnet command line configurations. Before using the DW IP Phone, some setup processes are required to
make the DW IP Phone work properly. Please refer to the Setup Menu for further information.
1.1
Hardware Overview
The DW IP Phone has the following interfaces for Networking, telephone interface, LED indication, and power
connector.
1.1.1
Two RJ-45 Networking interface, these two interfaces support 10/100Mps Fast Ethernet.
1.1.2
LED Indication: There is one LED indicator in the DW IP Phone to show the function
1.2
Software Overview
Network Protocol
•
SIP v1 (RFC2543), v2(RFC3261)
•
IP/TCP/UDP/RTP/RTCP
•
IP/ICMP/ARP/RARP/SNTP
•
TFTP Client/DHCP Client/ PPPoE Client
•
Telnet/HTTP Server
•
DNS Client
Codec
•
G.711: 64k bit/s (PCM)
•
G.723.1: 6.3k / 5.3k bit/s
•
G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
•
G.729A: 8k bit/s (CS-ACELP)
•
G.729B: adds VAD & CNG to G.729
Voice Quality
•
VAD: Voice activity detection
•
CNG: Comfortable noise generator
•
LEC: Line echo canceller
•
Packet Loss Compensation
•
Adaptive Jitter Buffer
Call Function
•
Call Hold
•
Call Waiting
•
Call Forward
•
Caller ID
•
3-way conference
DTMF Function
•
In-Band DTMF
•
Out-of Band DTMF
•
SIP Info
SIP Server
You can connect one RJ-45 Fast Ethernet port to the ADSL or Switch, and connect the
other one to your computer.
status, such as speaker phone, register, incoming call etc.
Tone
•
Ring Tone
•
Ring Back Tone
•
Dial Tone
•
Busy Tone
•
User Programming Tone
Phone Function
•
Volume Adjustment
•
Speed dial, Phone book
•
Flash
•
Speaker Phone
IP Assignment
•
Static IP
•
DHCP
•
PPPoE
Security
•
HTTP 1.1 basic/digest authentication for Web setup
•
MD5 for SIP authentication (RFC2069/ RFC 2617)
QoS
•
ToS field
NAT Traversal
•
STUN
Configuration
•
Web Browser
•
Telnet
•
Keypad
Firmware Upgrade
5/54
IP Phone
User Manual
Dynamix IP Phone User Manual
Advertisement
Table of Contents
