Step 2
Select the display mode from the Mode drop-down list.
Step 3
Enter the Server IP Address and Server UDP Port if the Mode is set
to Both or Remote.
Step 4
Click Apply to apply the settings.
Step 5
Click View System Log to view the detail information of system log.
4.4.6
Logout
Choose MAINTENANCE > Logout. The page shown in the following figure
appears. In this page, you can log out of the configuration page.
4.5 Status
You can view the system information and monitor performance.
4.5.1
Device Info
Choose STATUS > Device Info. The page shown in the following figure appears.
DSL-2750U User Manual
92