System Log; Logout - D-Link dsl-526e User Manual

Configuration

System Log

Choose Maintenance > System Log. The page shown in the right figure appears.
This section when enabled allows the system to begin logging events based on the
selected log level.
The router can only keep a limited number of log entries due to router memory
constraints. If you have an external SYSLOG server, you may choose to configure
external logging and all log entries will be sent to your remote server.
Configure the parameters in this page as described below.
Error: When the system is likely to result in a module abnormity, the system
generates an Error log.
Notice: When the system is under attack or logged in, or port status changes, the
system generates a Notice log.
Remote Log Enable: Send system log to remote host, maybe a domain or an IP.
Save Log to File: You can save current log table to a file.

Logout

Choose Maintenance > Logout. The page shown in the right figure appears. In this
page, you can log out of the configuration page.
74 D-Link DSL-526E User Manual