Local Network - D-Link DSL-2750U User Manual

DSL-2750U User Manual
It displays the current wireless settings and you can manually enter the settings
in the wireless device that's to be added in the wireless network.
4.2.4.3 Manual Wireless Setup
If you want to configure the Internet settings of you new D-Link Router manually,
click Manual Wireless Connection Setup. It will redirect to 4.3.1 Wireless
Settings.
4.2.4.4 Wireless WPS
In Wireless Connection page, Click Reset to Unconfigured, the page shown in
the following figure appears.
Once the "Reset to Unconfigured" button is clicked, the "wireless settings" will
be reset to factory default, other settings will remain unchanged.

4.2.5 Local Network

You can configure the LAN IP address according to the actual application. The
preset IP address is 10.0.0.2. You can use the default settings and DHCP service
to manage the IP settings for the private network. The IP address of the device is
the base address used for DHCP. To use the device for DHCP on your LAN, the
IP address pool used for DHCP must be compatible with the IP address of the
33