D-Link DSL-2750U User Manual page 8

Rear Panel
The following table describes the interface of the device.
Interface/Button
DSL
LAN4/3/2/1
USB
WIRELESS ON/OFF
RESET
ON/OFF
POWER
DSL-2750U User Manual
Figure 2 Rear panel
RJ-11 interface that connects to the telephone set
through the telephone cable.
Ethernet RJ-45 interfaces that connect to the Ethernet
interfaces of computers or Ethernet devices.
USB port, for connecting the 3G network card or other
USB storage devices.
Button to enable or disable WLAN.
Reset to the factory defaults. To restore factory defaults,
keep the device powered on and push a paper clip into
the hole. Press down the button for one second, and
then release.
Power on or off.
Interface that connects to the power adapter. The power
adapter output is: 12 V DC 1A.
5
Description