Network Tools - D-Link DSL-2750U User Manual

Query message header. The default query response interval is 10 seconds
and must be less than the query interval

Last Member Query Interval (1/10s): The last member query interval is
the amount of time in seconds that the IGMP router waits to receive a
response to a Group-Specific Query message. The last member query
interval is also the amount of time in seconds between successive
Group-Specific Query messages.

Robustness Value: The robustness variable is a way of indicating how
susceptible the subnet is to lost packets. IGMP can recover from
robustness variable minus 1 lost IGMP packets.

Maximum Multicast Groups:max multicast groups

Maximum Multicast Data Sources (for IGMPv3): max group data
sources that want to receive.

Maximum Multicast Group Members:Max member in one group

Fast Leave Enable: Enable or disable fast leave feature.
LAN to LAN (Intra LAN) Multicast Enable: Enable or disable Lan to Lan

msulticast.

4.3.11 Network Tools

Choose ADVANCED > Network Tools. The page shown in the following figure
appears.
DSL-2750U User Manual
67