Firmware Update - D-Link DSL-2750U User Manual

In this page, you can reboot device, back up the current settings to a file, restore
the settings from the file saved previously, and restore the factory default
settings.
The buttons in this page are described as follows:

Reboot: Reboot the device.

Backup Settings: Save the settings to the local hard drive. Select a
location on your computer to back up the file. You can name the
configuration file.

Update settings: Click Browse to select the configuration file of device
and click Update Settings to begin restoring the device configuration..

Restore Default Settings: Reset the device to default settings.
Notice: Do not turn off your device or press the Reset button while an operation
in this page is in progress.
4.4.2

Firmware Update

Choose MAINTENANCE > Firmware Update. The page shown in the following
figure appears. In this page, you can upgrade the firmware of the device.
The procedure for updating the firmware is as follows:
Step 1 Click Browse...to search the file.
Step 2 Click Update Firmware to update the configuration file.
DSL-2750U User Manual
86