Table of Contents
Advertisement
User Manual of DS-8100HMFI-TH Series Mobile DVR
•
Image Settings:
Click Set button for Image Settings to adjust the video parameters, including Brightness, Contrast, Saturation
and Hue.
•
Mask:
You are allowed to configure the privacy mask zones that cannot be viewed and recorded by the operator.
Check the checkbox before Mask and click the Area Settings button for Mask to set the mask areas. Please
follow the procedure below to set the areas:
Steps:
1) Press the Edit key on the remote control and a red block appears on the screen.
2) Press the Direction key on the remote control to adjust the position of the red block.
3) Press the Enter key on the remote control to save the position of the red block.
4) Press the Direction key on the remote control to adjust the size of the block and press Enter key to save
the setting.
Note:
Press the A button on the remote control to clear all the mask areas and up to 4 areas can be configured
for each channel.
•
Tamper-proof Detection:
Trigger alarm when the lens is covered and take alarm response action(s). For detailed information, please see
Chapter 7.2.3.
•
Motion Detection:
Once a motion detection event takes place, the device can analyze it and do many actions to handle it. For
detailed information, please refer to Chapter 3.2.
•
Video Loss Detection:
Detect video loss of a channel and take alarm response action(s). Please see Chapter 7.2.4 for detailed
information.
2.5 Configuring Display Settings
Purpose:
Display settings can be customized according to different needs. You can configure the preview mode, dwell time for
Figure 2. 8 Image Settings Interface
28
28
Advertisement
Table of Contents
