Accessing By The Wvs Platform; User Manual Of Ds-8100Hmfi-Th Series Mobile Dvr; Accessing By The Ivms Platform - HIKVISION DS-8100HMFI-TH Series User Manual

User Manual of DS-8100HMFI-TH Series Mobile DVR

The Mobile DVR can be remotely accessed via 3 platforms: WVS platform, iVMS platform and Push Mode platform.
Make sure the parameters configured are valid for the platform you select for login.

5.1 Accessing by the WVS Platform

Steps:
1. Enter the Platform Settings interface.
Menu>Basic Settings>Platform
2. Select Platform WVS in Select Platform, as shown in Figure 5.1.
3. Configure the following parameters:
Server IP: Input the static WAN IP of WVS server.
Port No: The same as the client port of server, the default value is 5660.
Device Register ID and Register Password: The ID and password of the Mobile DVR registered in the
manage system of WVS. The ID should start with "1", and with length of 9 numbers. You need to register the
ID and password for the device in the WVS platform before using.
4. After configuration, you can enter the Platform Status interface (Menu>Status>Plat) to check the status of WVS
platform.

5.2 Accessing by the iVMS Platform

Steps:
1. Enter the Platform Settings interface.
Menu>Basic Settings>Platform
2. Select Platform iVMS in Select Platform, as shown in Figure 5.2.
Figure 5. 1 WVS Platform Settings
42
42