8. Record Out
T h e s e o u t p u t s w i l l
able to be fed to a variety
of recording devices.
9. 2T Return
used to connect the mixer
Players.
10. Main Out
output the final stereo
line level signal sent from
the main mixing bus. The
primary purpose of these
Rear Panel
11. Channel Inserts
through to 4 on the AM 442D and 1 through 6 on the
AM 642D. This send and return will require a Y cord
that can send (pre-fader and pre-EQ) and receive
signals to and from an external processor.
AM442D/642D
12. Control Room Outputs
on the face of the mixer. This output has extensive
the addition of external signal processing devices
supplying audio to indoor areas that the main
speakers do not reach.
13. Group Out
the Group 1 and 2 Faders on the main mixer. These
experience.
14. Main Out
line level signal sent from the main mixing bus.
etcetera).
7