Custom Panel Hinge Cutout; Custom Grille Installation - Viking DFBB536 Installation Manual

Bottom-Mount Custom Panel Hinge Cutout
1
3
5 / 8
"
( 1 . 6
c m
)
2
1
3 "
( 7 . 6
2 c
m )
Install two screws but DO NOT tighten all the way.
1
3
3
5 / 8
"
( 1 . 6
c m
)
2
Cut out diagonal in lower left corner.

Custom Grille Installation

1
Remove air grille center blade.
54
(if required)
2
Measure and cut 2-1/16" diagonal in
lower left corner.
4
Surfaces
are flush
1/4" (0.6 cm)
base panel added
Final view of lower corner
2
Remove two 1/4" (0.6 cm) screws with a magnetic
extended screwdriver at least 8" (20.3 cm) long.
Custom Grille Installation
(cont.)
3
Pull air grille assembly forward.
5
Using eight screws removed from the mounting brackets,
attach mounting brackets to the custom wood grille using
predrilled pilot holes. (See grille overlay specifications for
proper alignment and pilot hole placement.)
7
Install two 1/4" (0.6 cm) screws with a magnetic
extended screwdriver at least 8" (20.3 cm) long.
55
4
Remove 2 mounting brackets from
the grille air assembly.
6
Insert custom air grille assembly.
8
Install custom air grille center blade.