Maintenance Settings - Panasonic KX-TDA5480 Programming Manual

3.2 Maintenance
3.2.2

Maintenance Settings

1.
Click 1.2 Maintenance Settings in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
• Click ALL CLEAR to reset all parameters to the default values.
• Click MENU to return to the main menu (see "3.1 Main Menu for the Installer").
• Click LOGOUT to log out from the IP-GW4 Maintenance Utility (see "3.4.2 Log Out").
3.
Click OK.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will see an error screen. Click OK and try
again with correct values.
4.
Confirm your entry and click OK.
To return to the previous screen, click CANCEL.
Parameter Descriptions
Username/Password Settings
Parameter & Description
Username for Installer
Installer-level log-in user name.
Password
Installer-level log-in password.
Password (Confirmation)
Confirmation of the installer-level log-in password.
56 Programming Guide
Default Value Range
Installer Max. 16 characters
Installer Max. 16 characters
No default Max. 16 characters