Automatic Route Redirection - Panasonic KX-TDA5480 Programming Manual

2.2 Programming
Parameter & Description
GW No/Group No.
*
Specifies the number of the destination gateway or
gateway group.
Detailed Explanations

Automatic Route Redirection

When more than one card is installed in a PBX, you can assign them to a single gateway group.
Grouping allows you to logically combine the channels of multiple cards in a PBX (there are
four channels per card). This aids the effective use of channels in a PBX.
The following diagram and tables provide an example of this configuration.
Example of Configuration
In the diagram below, there are two cards (cards B and C) installed in PBX 2.
• PBX Code: 951
• Extension Number: 3 digits
IP Address: 192.168.1.1
Example of Gateway Entry Programming
Through gateway entry programming, cards B and C are grouped into a single gateway group.
GW No.
Comment
IP Address
Group No.
36 Programming Guide
PBX 1
Card A
Parameter
0
IP-GW Card A
192.168.1.1
0
Default
GW No.: 0,
Group No.: 1
• PBX Code: 952
• Extension Number: 4 digits
Gateway Group 1
IP Address: 192.168.1.2
IP Network
IP Address: 192.168.1.3
Card A Card B
1
IP-GW Card B
192.168.1.2
1
Value Range
GW No.: 0 to 511,
Group No.: 1 to 256
PBX 2
Card B
Card C
Card C
2
IP-GW Card C
192.168.1.3
1