Lacanche CORMATIN LG 731 G User Manual page 42

CLEANING AND MAINTENANCE
Stainless steel bodied Cookers :
Use special stainless steel cleaners (ZIP INOX®, JOHNSON INOX®, PPZ INOX®, for instance). Do
not use abrasive cleaners.
Stainless-steel hop :
The entire hob is pressed or comprises pressed recesses for easy cleaning and improved hygiene
(no water trap). The hob should be cleaned with liquid, non-chlorinated products to avoid scratching
the steel.
If the hob is stained use a clay stone- and soap-based paste available from department stores.
Brushed Stainless-steel trim :
The brushed stainless-steel trim should be cleaned with aerosol products available from department
stores. You should nevertheless choose a cleaner that contains only a small quantity of silicone to
avoid leaving white streaks after the product dries.
Brass trim :
Use a special brass-cleaning product (e.g. MIROR or BRASSO ) and a soft cloth. If the product runs
® ®
onto the enamel do not rub (these products generally contain abrasives). Rinse immediately with
clean water without rubbing.
Another solution is to use solid soap (Pierre d'argent, Pierre d'argile) applied with a damp sponge to
the zones to be cleaned.
This solution is also very effective for cleaning and bringing a shine back to brass or chrome surfaces.
Enamelled surfaces :
Use a sponge soaked in soapy water or a window-cleaning product but never scouring powder.
You can also use methylated spirit but only when the range is cold.
Ovens :
Be sure the power supply is disconnected and the ovens
are cold.
Remove scales: Loosen the screw with your hand.
Slide the brackets a small distance upwards to disengage
the bracket from the lugs .
Caution : To remove the brackets, be sure the brackets
are locked
on the lugs
before loosening the screw .
Clean the side panels with a non abrasive cleaning
agent. Harsh cleaning agents should not be used. If you
use such product, first remove the oven door seals and
reinstall after cleaning.
Rinse and dry.
After cleaning, replace the back panel with the screws and the washers. Be sure you the screws
are correctly screwed.
USER'S MANUAL
Cormatin - Ft 120a - GB - Rév 07 - Modifié le : 07/10/2013 42/44