Lacanche CORMATIN LG 731 G User Manual page 12

Ensure that the materials adjacent to the lateral panels of the oven are not
If the adjacent parts contain heat-sensitive materials, ensure there is a 50-mm gap between the
side of the oven and the parts in question.
We recommend the front edge of the hob be positioned 50 mm further forward than the adjacent
(see below).
.
This feature is particularly recommended for built-in ovens as it ensures a 50 mm gap between the
appliance and the wall. It also increases the depth of the hob to 722,5 mm.
Product code : DS 700.
A shut-off valve must be install and accessible close to the appliance in order to isolate it from the
gas applicable or to facilitate cutting the gas supply : Please ensure that installation complies with
local applicable regulations and standards
- Natural gas supply :
Mandatory to install an Automatic Shut-off Valve (since 1st July 1997 in France)
- LPG supply (butane, propane) :
Propane : Class 1 Safety Expansion Valve.
Butane :
approved hose, maximum length 2 metres).
INSTALLER'S MANUAL
INSTALLATION/ POSITIONING
Cormatin - Ft 120a - GB - Rév 07 - Modifié le : 07/10/2013 12/44