Lacanche CORMATIN LG 731 G User Manual page 16

Ignite all the burners on the hob.
After a couple of minutes, reduce to lowest setting.
Remove control knob by pulling it off (see
mum.
Setting the safety thermocouple (Hob) :
If the burner goes out, having kept the control knob pushed in for roughly twenty seconds, check
that :
-
-
- The thermocouples and magnetic heads are absolutely clean.
Remove control knob by pulling it off (see
Using a flathead screwdriver adjust the simmer flame
OVEN :
Open oven door and remove oven base plate by pressing down and backwards and then lifting
I
out (see , figure
Remove drawer.
Through the drawer aperture, loosen 7mm nut (see
Remove the 8mm nut and grub screw and washer within it at the front of the burner (see
8
).
INSTALLER'S MANUAL
CHANGING GAS TYPE
G
7
).
I
Cormatin - Ft 120a - GB - Rév 07 - Modifié le : 07/10/2013
G
5
/figure ).
H
6
(see , figure
H
6
figure ).
5
K
, figure.
7
G
5
, figure
).
H
9
)
J
).
-
6
J
8
16/44