Lacanche CORMATIN LG 731 G User Manual page 18

Adjusting the primary air :
> Replace base plate and drawer (figure
Adjusting air ring
CAUTION : After connection or changing gas type, it is imperative to adjust for
Comissioning (fine tuning) Oven Burner :
Ignite the oven to Gas Mark 10. Wait for 15 minutes to reach temperature and then reduce to
minimum setting, and remove the control knob (see
allowing access for the screwdriver is located behind Gas Mark 7.
Note
Setting the safety thermocouple (Oven) :
If the burner goes out, having kept the control knob pushed in for approximately twenty seconds,
check that:
- The tip of thermocouple (see
contact with the burner.
- The thermocouples and magnetic heads are absolutely clean.
mum to minimum.
INSTALLER'S MANUAL
CHANGING GAS TYPE
figure
13
).
12
M
N
15
, figure )
M
14
Cormatin - Ft 120a - GB - Rév 07 - Modifié le : 07/10/2013
12
), table n° 7 appendix 0.
14
, figure ).
M
, figure
N
13
14
). The hole
-
3 mm
15
18/44