Table of Contents

Advertisement

Problem solving guide

General problems

Problem
The indicator lights
and the time display
are dark. Only the K
indicator is flashing
slowly.
Detergent residue is
left in the dispenser at
the end of a
programme.
The detergent
dispenser lid cannot
be closed properly.
At the end of a
programme there is a
film of moisture on
the inside of the door
and the interior walls.
Water remains in the
wash cabinet at the
end of a programme.
56
Possible cause
The indicator lights and
the time display have
switched off automatically
to save energy (Standby
mode).
The dispenser was still
damp when detergent was
added.
Clogged detergent residue
is blocking the catch.
This is caused by the
drying system and does
not indicate a fault.
The filter combination in
the wash cabinet is
clogged.
The drain pump or
non-return valve may be
blocked.
The drain hose is kinked.
Remedy
Press the On/Off button K.
Standby will be cancelled.
Make sure the dispenser is
dry before adding
detergent.
Clean the detergent from
the catch.
The moisture will dissipate
after a short while.
Before rectifying the
problem, you must:
– Switch the dishwasher off
with the On/Off button K.
Clean the filter combination.
See "Cleaning and care".
Clean the drain pump or the
non-return valve. See
"Maintenance".
Remove any kink from the
drain hose.

Advertisement

Table of Contents
loading

Table of Contents