Miele TX2070 Operating Instructions Manual page 43

^ Open the door.
^ Switch the dishwasher on using the
K button.
The K indicator light comes on.
^ Select the programme required with
the Programme selector button.
^ Press the , button.
The last Delay start time used will
appear in the time display. The ,
indicator light comes on.
^ Set the required Delay start time
using the , button.
If the , button is kept pressed in, the
time will increase automatically up to
24^. To start again with 30 minutes,
press the , button twice.
^ Close the door.
The time starts counting down until the
programme start time: in one-hour
steps for Delay start periods of over 10
hours, and in minutes for Delay start
periods of under 10 hours.
When the set time is reached, the
programme selected will begin
automatically. The time left for a
programme to run then appears in the
display, the , indicator light goes out
and the indicator light for the selected
programme comes on.
Additional options
How the Delay start time appears in
the display:
up to 59 minutes:
e.g. 30 minutes = 30
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = 5.00
10 hours or more:
e.g. 15 hours = 15^
Starting a programme before the
Delay start period has elapsed
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
^ Open the door.
^ Switch the dishwasher off with the K
button.
^ Switch the dishwasher on again with
the On/Off button K.
^ Select the programme required with
the Programme selector button.
^ Start the programme by closing the
door.
43