Switching Off The Refill Indicators - Miele TX2070 Operating Instructions Manual

Before using for the first time

Switching off the refill indicators

If you use combination products and do
not want the refill indicators for salt and
detergent to be displayed, you can
switch off both indicators together.
^ Switch the dishwasher off with the
On/Off button K.
^ Press the programme selector button
in and, whilst holding it in, switch
the dishwasher on using the On/Off
button K.
Keep the programme selector button
pressed in for at least four seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Turbo button nine times.
The Delay start indicator will flash
briefly 9 times at intervals.
24
The characters flashing in the display
will show whether the refill indicators
are switched on or off.
– "p 1": The refill indicators are
switched on.
– "p 0": The refill indicators are
switched off.
^ To change the setting, press the
Programme selector button.
The setting is now stored in memory.
^ Switch the dishwasher off with the
On/Off button K.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the refill indicators back
on.