Chapter 13 - Meeting; Ipedge Meeting Initial Configuration; Meeting Ip Address And Hostname - Toshiba IP edge EP Installation Manual

Chapter 13 – Meeting
IPedge MEETING INITIAL
CONFIGURATION
Meeting IP Address and
Hostname
Installation Manual August, 2011
The IPedge Meeing server, installed on the IPedge EC and EM server
platforms, requires a license to operate. Use this procedure to configure
the Meeting server to run in your system environment.
1. Login in to Enterprise Manager, select Applications > Webmin. In
Webmin select Networking > Network Configuration then, select
Hostname and DNS Client.
Ensure that the Search Listed radio button is selected.
Enter the Hostname - This is the host name you assigned to the
IPedge System.
IPedge Server Host Name
2. In the Search Domains box enter the Domain Name where the
IPedge is located.
3. Click on the Save button.
4. Select Networking > Network Configuration. Click on Host
Addresses.
Note: IP Address 127.0.0.1 is the localhost address for the IPedge
system. DO NOT edit this entry. If this entry is changed, edited or
deleted the system may come inoperable and require the disk to
be re-imaged.
5. Click on the IP Address for the IPedge system to edit the entries.
Enter the hostnames for Meeting Admin, Webcon and, the IPedge.
IPedge domain_name.com
13-1