Add Stations To A Station/Hunt Group - Toshiba IP edge EP Installation Manual

ADD STATIONS TO A STATION/HUNT GROUP

ADD STATIONS TO A
STATION/HUNT GROUP
15-4
1. Using Enterprise Manager, add the voicemail ports to the Hunt
Groups by going to Station > Station Groups.
3090
Make the following selections:
Hunt is Distributed Hunt
Pilot Number should be the one used in the Numbering scheme Example:
When the Message button is pressed, it dials 3090.
Multiple DN Hunt is set to Disable
Auto Campon is an option.
2. Click Save.
3. Click the members tab, then click the Add Members icon. Hold the
Shift key to select multiple or hold Control and select the members,
then click OK.
4. Go to System > Voicemail Data. Enter the Pilot number in the Hunt
group to the Central Voicemail Callback field. Keep all the other
defaults.
Enable Output of CLASS / ANI and DNIS to receive Caller ID in SMDI
(optional).
SMDI Time Stamp Packet should always be set to Disable.
Transfer Direct to Voicemail DN: should be set to the same Pilot number.
5. Assign the Message Center by going to Station > Station Assignment,
then select an individual DN and enter the Pilot # into the VM MW
Center Port.
6. Set up one station and then copy the others.
Installation Manual August, 2011