Worx WG169E.5 Operation Manual page 10

C
D
10
E
15
14
F1
3 in 1 Grass Trimmer/Edger
9 10
Battery Pack may become too hot to permit charging.
Allow time for the battery to cool down before
recharging.
3. to ReMove oR INStAll BAtteRy PAck
(See fig. c)
Depress the battery release button to remove Battery
Pack (2) from your trimmer. After recharging, insert the
Battery Pack onto trimmer's battery bracket. A simple
push and slight pressure will be sufficient.
F2
4. SAfety oN/off SWItcH (See fig. D)
The safety switch is locked off to prevent accidental
starting. Depress the Lock Off Button (9) then depress
the On/Off Switch (10) and release Lock Off Button. Your
trimmer is now on. To switch off, just release the on/off
switch.
11
WARNING! the cutting head continues to
rotate after the trimmer has been switched
off; wait until it has completely stopped then lay
down the tool.
5. ADjUStMeNt of tHe teleScoPIc SHAft
(See fig. e)
G
Step one foot on the Safety Guard, then use one hand
to pull up the Telescopic Shaft Adjustment Trigger (8),
adjust the length of the Telescopic Shaft to the most
comfortable length. Release the Telescopic Shaft
Adjustment Trigger to lock in position.
6. MAIN HANDle RotAtIoN (See fig. f1, f2)
First, hold down the lower housing with your foot
and pull upward on the Upper Shaft (15). Then rotate
the Upper Shaft clockwise 90 degrees (See Fig.
F1) and release; the Shaft will be locked in position
automatically (See Fig. F2).
H1
16
H2
WG169E WG169E.5
WG169E.9