Using Two Voicetone Pedals - TC-Helicon Voicetone Double User Manual

You can use two or three VoiceTone pedals in series.The
connection order is important:
VoiceTone Correct should be connected before
o
Double
VoiceTone Create should be connected after
o
Double
Step 1:
Follow the Quick Start guide for both VoiceTone Pedals.
The following steps describe connecting Double's
output to VoiceTone Create

Using Two VoiceTone Pedals

Step 2:
Instead of connecting Double to the PA, connect its Left
(mono) output to the mic input on Create.
Step 3:
Connect the 2nd VoiceTone pedal, in this case Create, to
the PA.
Step 4:
Set the Input level knob on Create to the minimum
position.
11