Switching Backlight On And Off; Main Screen; Timer Mode - NovaSail NS100 Operating Manual

Operations
Press and hold
•
on the screen. If the OFF sequence starts, simply release the button
before the sequence "3", "2", "1" is finished.
To turn off the backlight, press and hold
•
the icon
Note :
When you press and hold the
backlight, you will not make any selection and therefore will not change any
parameter.
This mode provides the speed and heading of the vessel.
SPE
, Upper Line: The speed over ground is displayed with a resolution of 0.1
knots (KT). The minimum speed is 1 knot, the maximum speed is 99.9 knots. The
value displayed can be averaged; see "Speed sensitivity: SPE", page 14.
COG
, lower line: The course over ground (heading in degrees) as measured by
the GPS receiver is displayed. The value displayed can be averaged; see "GPS
Heading sensitivity: COG", page 14.
This mode provides an adjustable downcounter and an upcounter timer with the
heading of the vessel on the lower line.
TIM
, upper Line: The timer starts in downcounting mode; the starting value can
be adjusted to count down from 5, 4 or 1 minutes by a long press on the
button.
8

Switching backlight on and off

for more than 1 second until the icon
disappears from the screen.

Main screen

Timer mode

for more than 1 second until
button to switch on/off the
NS100
is displayed
Operating Manual