Mob: Man Over Board - NovaSail NS100 Operating Manual

This mode provides the coordinates, the distance in meters and the heading to a
GPS location recorded when the MOB button is pushed.
Note :
The MOB mode can be entered only if enough satellites are locked,
NS100
otherwise the
To memorize the current GPS coordinates
From any mode push the
•
mode. The current GPS position is automatically memorized and the display
will be as follows:
MOB DIS/COG,
This line displays sequentially the distance in meters ('DIS') and the heading
('COG') to track back to the memorized GPS location.
COG
, lower line : Course Over Ground
The course over ground as measured by the GPS receiver is displayed.
To display the GPS coordinates memorized
When the MOB screen mode is engaged, the memorized GPS coordinates
•
can be displayed by pushing
longitude then the latitude (lon/lat blink). Another push on
device to the MOB screen mode.
To return to the main screen mode
The MOB screen mode can only be exited by a long push on
•
device will return to the main screen mode and a new GPS location for the
MOB position can be recorded afterwards; the previous MOB position is
lost.
NS100
Operating Manual

MOB: Man Over Board

will emit 5 beeps and the display will remain unchanged.
button, the device enters the MOB screen
upper Line (
blinking
) : Man Over Board
again. The device will display the
Operations
will return the
. The
11