Table of Contents
Advertisement
Waypoint mode
The WAY mode allows waypoints in your
(3 characters) and the geographical coordinates.
Note :
The maximum distance to a waypoint displayed is 999 nautical miles.
To enter the WAY mode:
NS100
When the
•
The waypoint number and name (3 characters) are displayed in the mode
•
lines of the upper screen.
The geographical coordinates are displayed in the lower screen.
•
Note:
You can only exit the WAY mode by switching off the
until "OFF" is displayed).
How to input the name and coordinates of a waypoint
The
•
from 'a' to 'z' for letters to be changed.
The
•
Memorization of a waypoint
First select the waypoint number: W00 to W19
•
Enter a name (3 characters).
•
Select 'NOR' (North) if the longitude is in the northern hemisphere or 'SOU'
•
(South) if it is in the southern hemisphere.
Memorize the longitude coordinate: for example 45'36.222.
•
Select 'EAS' if the latitude is east or 'WES' if west.
•
Memorize the latitude coordinate, for example: 23'46.345.
•
When the latitude coordinate is completed, it rolls back to the selection of
•
the waypoint number.
16
Mode Waypoint (WAY)
is off, press first
and
buttons allow the value from 0 to 9 for numbers and
button switches to the next character.
NS100
to be memorized with a name
then
NS100
simultaneously.
NS100
(long press
Operating Manual
Advertisement
Table of Contents
