30 hours. It can be installed in minutes and there is no need to drill a hole in the hull or use a wired connection. NS100 We hope you enjoy sailing with the . We encourage you to read this manual thoroughly to learn about the many features of your exciting new Novasail product. NS100 Operating Manual...
Installation NS100 Wherever you mount the , it shouldn’t be flush to any thick surface such as the hull, so that the sensitivity of the embedded GPS receiver is not affected. Also a direct mount on a metal surface will reduce the receiver sensitivity.
Controls and display description Buttons & display Backlight Battery Screen mode selection NS100 Start/stop the Upper Backlight ON/OFF line Data Clear Lower Man Overboard line selection Data Screen mode NS100 has several modes of operation, each mode is based on information that is displayed on the upper and the lower line.
Coordinates, distance & heading to a memorized GPS location mode • MOB : Man OverBoard • COG : Course Over Ground (GPS heading) • LON : GPS LONgitude of the memorized location • LAT : GPS LATitude of the memorized location NS100 Operating Manual...
If the device does not turn on, you need to check if the battery is fully charged, that the battery compartment is dry, and the polarity is correct. Note : NS100 Until enough satellites are locked, the is not ready to use. For all the modes requiring the GPS data, the screen will display ”---”...
, upper Line : The timer starts in downcounting mode, the starting value can be adjusted to count down from 5, 4 or 1 minutes by a long push on the button. NS100 Operating Manual...
(e.g. 1 min and 234 alternatively for 1.234 minute). Maximum speed and total distance This mode provides the maximum speed recorded and the total distance. , upper Line : Speed Max NS100 Operating Manual...
GPS location recorded when the MOB button is pushed. Note The MOB mode can be entered only if enough satellites are locked, NS100 otherwise the will emit 6 beeps and the display will remain unchanged. To memorize the current GPS coordinates •...
Page 11
The device will return in the main screen mode and a new GPS location can be recorded afterwards (the previous MOB position is lost) . Note : while using the MOB screen mode, you can still switch on/off the NS100 backlight or turn off the NS100 Operating Manual...
Operations SET mode NS100 The SET mode allows the adjustment of your parameters sequentially as follows : • Average time for the speed computation (SP). The speed is computed based on the average time selected • Average time for the heading computation (COG).The course over ground is...
Limited warranty This product meets or exceeds all of Novasail’s rigorous quality controls and inspection standards. Complete services will be provided in accordance with the statement of warranty set forth below if any manufacturing defect or natural failure occurs within the warranty period.
All NOVASAIL LTD products are sold pursuant to NOVASAIL LTD’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the NOVASAIL LTD products described herein, and NOVASAIL LTD assumes no liability whatsoever relating to the choice, selection or use of the NOVASAIL LTD products described herein.
Need help?
Do you have a question about the NS100 and is the answer not in the manual?
Questions and answers