The SET mode allows the adjustment of your
follows :
Speed sensitivity
•
GPS heading sensitivity
•
Screen contrast
•
To enter the SET mode :
Your device must be switched OFF.
•
Press first
•
menu: SET will be displayed on the upper line.
Each parameter is displayed on the lower line (line or column). The required
•
value is adjusted by the button
The parameter is memorized when
•
The SET mode is exited automatically at the end of the sequence or by
•
switching off the device.
Name
Speed sensitivity
GPS heading
sensitivity
LCD contrast
level
Firmware version
NS100
Operating Manual
SET mode
then
simultaneously. The device will enter the setup
Display
SPE
COG
LCD
CON
VER
Advanced Operations
NS100
parameters sequentially as
.
is pushed.
Description
Hi: High sensitivity
•
Md: Medium sensitivity
•
Lo: Low sensitivity
•
Hi: High sensitivity
•
Md: Medium sensitivity
•
Lo: Low sensitivity
•
- level 1 to 7 (default level: 5)
Firmware version number
13