Waypoint Mode - NovaSail NS100 Operating Manual

Operations
TRP
, Lower line: TRiP distance
The total distance in nautical miles (NM) is displayed. This value is saved when
the device is turned OFF. It can be reset by pushing the
Note :
Both the TRP and SPM value blink until enough satellites are detected.
This mode allows the direction and distance to reach the 20 memorized
waypoints to be displayed: W00 to W19. Each time a waypoint is selected, the
direction and distance needed to reach it are displayed sequentially.
To use a waypoint
By default, W00 is displayed on the mode line.
•
Press and hold
•
The name of the waypoint is displayed with 3 characters.
The direction and distance are displayed sequentially.
•
To Memorize a waypoint while sailing
Press and hold
•
Press
•
The previous coordinates are automatically overwritten by the new ones.
The direction and distance to the waypoint are displayed sequentially.
•
10
Waypoint mode: Wxx
to select the required waypoint, from W00 to W19.
to select the waypoint (from W00 to W19).
to memorize the current position into the selected waypoint.
button.
NS100
Operating Manual