Hunter MH37 Operator's Manual page 153

Problem
No AC power
No power to AC devices
Inadequate power to AC
devices
Continuous tripping of "AC
Main" breaker
No power at AC outlets
AC Electric Systems
Troubleshooting
Possible Cause
Shore power breaker(s)
tripped or off
Shore power cord not con-
nected
Loose or disconnected wire
Breaker(s) at AC Panel
tripped or off
Shore power cord not con-
nected
Loose or disconnected wire
Electrical demand greater
than output
Cause of problem not cor-
rected
"Outlet" breaker on the
AC Panel is OFF
Ground fault interrupter
tripped
Turn breaker on or reset
Check cord, plug in if necessary
Tighten connections. See your dealer
Turn breaker on or reset
Check cord. Plug in if necessary
Tighten connections. See your dealer
Switch off devices
and equipment not needed
Use shore power AC line if available
Determine cause and correct problem before resetting
breaker; see your dealer if problem persists
Switch breaker to ON
Reset button on outlet and test
8.11
Solution