Advertisement
INSTALLATION INSTRUCTIONS
INSTALLATION
WARNING!
The installation must be carried out by a suitably qualified and licensed person and in accordance
with the current standards.
Fitting guidelines
► The oven is manufactured to work with three-phase alternating current (220V-240V/50Hz). The connection diagram is
also found on the cover of the connection box.
Remember:
► The connection wire should match the connection type and the power rating of the oven.
► The connection cable must be secured in a strain-relief clamp.
WARNING!
Remember to connect the safety circuit to the connection box terminal marked with . The electricity
supply for the oven must have a safety switch which enables the power to be cut off in the case of an
emergency. The distance between the working contacts of the safety switch must be at least 3mm.
Before connecting the oven to the power supply it is important to read the information on the data
plate and the connection diagram.
USER MANUAL
PAGE 10
Hide quick links:
Advertisement
