Table of Contents
Advertisement
UPGRADE FIRM WARE
Confirm the version of firmware.
1. Open a tray.
2. Press the "SEARCH DOWN"
"POWER" key on the remote controller.
Displayed on the FL tube like "1022". ex)
3. Turn off the power switch and power on, again.
Initializing
4. While display version of firmware, turn off a mechanical power switch.
Upgrade the firmware
1. Connect a video monitor to video out jack on the DV-SP302.
2. Turn on the power switch and standby switch on.
3. Setting the disc on the tray. (Down load firmware data disc)
4. Will start the Firm Ware updating.
Display repeat "ERASES" and "WRITE" on the monitor.
Will tray open after finish the updating.
Light up "STANDBY/ON" LED. = Complete the upgrade FW.
5. Turn off mechanical power switch.
6. Turn on the power switch again and take out the disc and close the tray.
button 2 second at the unit and
1022= FW version 1.22
DV-SP302
Advertisement
Table of Contents
