Table of Contents
Advertisement
UPGRADE FIRMWARE
1. Data writing for DVD main board
1-1. Writing the F/W data in DVD main board
1-1-1
Set the DVD main board on the unit.
1-1-2
Connect the FFC and Jig between the DVD main board and Personal Computer.
(Using the F/W upgrade Jig board and FFC cable to P104)
1-2-3 Then the power and standby switches are turn on.
1-1-4
Run the data writing program.
EX) Save the program above in C:DV-S555 folder. The program name are
B1BK1048.SZ0, Down.bat, down, ok_down.exe, ok_down
Open the DOS window
Key input "cd DV-S555" and then push the ENTER key.
Turn thepower switch on and push the STANDBY switch.
Key input the " down b1bk1048.szo" and push ENTER.
Space
Push the ENTER again.
Key input "MO"and ENTER.
Key input "SZL"and ENTER.
The program of a computer running automatically.
<Display of Computer>
000000000000000000000000000
Turn off the power switch, and disconnect the upgrade kit. (Finish)
FW file name .sz0
zero
MS-DOS prompt
DV-S555
Advertisement
Table of Contents
