Switching On The Cleaner; Pressure Regulation (Tornado Lance); Using Cleaning Agents - Nilfisk-ALTO NEPTUNE PE Operating Instructions Manual

NEPTUNE PE/DE
4.3 Switching on the
cleaner
4.3.1 Cold water operation
4.3.2 Hot water operation
4.4 Pressure regulation
(Tornado Lance)
4.5

Using cleaning agents

8
6
If you want to use detergents,
you will need an external injec-
tor. Please contact your local
Nilfisk-ALTO distributor for fur-
ther information.
Before starting up the engine,
you must carefully read through
the instructions for use of the
engine. In the instructions for
use the operation and service of
the engine is described.
When the engine has been
started, the high pressure wash-
er can be used for cleaning with
cold water.
1. Turn the switch to the re-
quired temperature. Now 6
lights up and the machine is
ready for use. If you want to
operate with a temperature
above 100°C, thurn the rotary
knob (black) on the pump
clockwise to limit stop.
2. Unlock the spray handle and
squeeze the trigger.
3. The oil burner will start.
4. Release the trigger and lock
the spray handle when not in
use.
1. Turn the twist grip on the
spray unit:
– High pressure =
clockwise (+) for high pres-
sure
– Low pressure =
counter-clockwise (–) for low
pressure.
CAUTION!
Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.
Original Instructions