Charging The Cellphone With The Radio - Kaito Voyager KA500 User Manual

KA500 KAITO
Charging Your Cellphone or Portable Digital Device

1. Charging the cellphone with the radio

Step 1: Connecting your cellphone
Take the included cable and connect the USB end directly into the Voyager‟s USB Port on the back. The other
end of the cable will take one of the included Power Tips that fit your phones power jack. If you have a USB
phone like a Blackberry, you should have your USB Cable that comes with your phone. For iPod/MP3, since
the standard charging method is USB, simply use the same cable that you plug into your computer‟s USB
port.
Step 2: Select Power Out
Select the power selector to OUT position on the back of the unit.
Step 3. Select from 3 ways to power your device
A. Cranking to charge
B. Solar Panel charge. Set the radio under direct sunlight (best method) and the solar panel will start to
charge the cellphone as soon as it is in the sun.
C. Use the optional AC adaptor. Connect the adaptor to the wall outlet and it will start to charge your cellphone
immediately.