5) Power via computer USB cable
The Voyager has a direct USB jack on the back of the unit under the rubber flap on the bottom right. You can
connect the radio to your computers USB port with any standard USB cable set. Then set the Charging
Selector on the back of the unit to "IN", and set the Power Selector to SOLAR/CRANK, and the radio will
operate and charge the built-in battery of the USB power.
B) Power Indicators
When the rechargeable battery power is high, the HI green light on the front of the Voyager is on.
When the battery power is low, the LOW red light is on. When you see this, it is recommended to charge the