Adjustment Of Air Direction - Carrier 40RC003603 Owner's Manual

Carrier 40rc003603 central remote controller for 64 systems air conditioner

Hide thumbs

Table of Contents

• For details, refer to the Owner's Manual attached to the indoor unit.

To operate the discharge louver automatically

Selection of MONITOR/SET

Push "MONITOR/SET" button to match to "SET".

If the operation stops,

push "ON" button. "ON" indication goes on.

Selection of LOUVER

Push "LOUVER" button. "LOUVER" indication

goes on.

Push "MONITOR/SET" button again to match to

"MONITOR", and setting completes.

To fix the discharge louver at a specific position

Push "MONITOR/SET" button to match to "SET" while the air conditioner operates (Louver operation), and push the

"LOUVER" button.

• "LOUVER" indication goes off.

Push "MONITOR/SET" button again to match "MONITOR". Then the setting completes.

• The discharge louver stops soon.

Do not move the discharge louver directly with hands. It may cause a trouble.

Select the direction of the discharge louver by the Louver operation button on the remote controller.

When using an air conditioner of which discharge louver has no AUTO function

When using the central remote controller on an air condi-

tioner of which discharge louver has no AUTO function,

"LOUVER" and "MANUAL" indications go on by pushing the

Louver operation button, after a while they go off.

• In this time, fix the discharge louver to the desired position

for usage.

• If cooling operation is performed with downward discharging of louver, dewing is caused on the cabinet or

surface of the louver resulted in falling of dewdrops.

• If heating operation is performed with horizontal discharging of louver, temperature unevenness may become

large in the room.