Start/Stop Operation For All/Zone - Carrier 40RC003603 Owner's Manual

Start/Stop Operation for ALL/ZONE

Method of collective start/stop
All the connected indoor units can be started/stopped with individual set-up contents.
1
Check that "MONITOR" indication goes on.
If "MONITOR" indication goes off,
push "MONITOR/SET" button to match to
"MONITOR".
2
Selection of ALL/ZONE/UNIT
Push "ALL/ZONE" button to match to "ALL".
"ALL", "ON", and "OFF" indications flash.
3
ON/OFF
ON Push "ON" button.
"ON" indication goes on.
OFF Push "OFF" button.
"OFF" indication goes on.
Method of start/stop in each zone
All the indoor units entered in the same zone can be started/stopped with individual set-up contents.
1
Check that "MONITOR" indication goes on.
If "MONITOR" indication goes off,
push "MONITOR/SET" button to match to
"MONITOR".
2
Selection of ALL/ZONE/UNIT
Push "ALL/ZONE" button to match to "ZONE".
"ZONE", "ON", and "OFF" indications flash.
3
Selection of ZONE No.
Push "ZONE" button to match to the ZONE No.
to be started or stopped.
All the entered UNIT Nos. of in the Zone are
indicated in the Operation monitor unit indica-
tion part.
4
ON/OFF
ON Push "ON" button.
"ON" indication goes on.
OFF Push "OFF" button.
"OFF" indication goes on.
To start or stop another zone successively, repeat steps
MONITOR
SET ALL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED
ZONE SET/ENTER SELECT OFF
1 2
MONITOR ZONE
SET
1 2 3 4 5
MONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED
ZONE SET/ENTER SELECT OFF
1
2
3
3 4
and .
ON
ON CENTER
OFF
MODE FAN TEMP .
AUTO
˚C
COOL
LOUVER
MODE TEMP.
FILTER RESET CHECK
FAN LOUVER
TIMER ON
3
ON
ON CENTER
OFF
MODE FAN TEMP .
AUTO
˚C
COOL
LOUVER
MANUAL
MODE TEMP.
FILTER RESET CHECK
FAN LOUVER
TIMER ON
4
13