Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation; Adjusting Air Flow Direction - Carrier split room air conditioner remote control Manual

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
Carrier
display panel of the indoor unit illuminates.
1. Press the MODE button to select Auto.
AUTO
2. Press the TEMP button to set the desired
SET TEMP.
CLOCK
temperature. The temperature can be set
within a range of 17 C(62 F)~ 30 C(88 F) in
SPEED AUTO
O
1 C/2 F increments.
MODE 3. Press the ON/OFFbutton to start the air
1
conditioner.
ON
TEMP.
2
OFF
FAN SPEED
NOTE
3
1. In the Auto mode, the air conditioner can logically
SLEEP
AIR DIRECTION CLOCK
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
SWING TIMER
actual ambient room temperature and the setting
LED CANCEL
TURBO temperature on the remote controller.
RESET F/C
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
Carrier available.
1. Press the MODE button to select COOL, HEAT,
COOL (cooling & heating models only) or FAN mode.
SET TEMP.
2. Press the TEMP buttons to set the desired
CLOCK
temperature. The temperature can be set
within a range of 17 C(62 F)~ 30 C(88 F) in
SPEED AUTO
O
1 C/2 F increments.
MODE
3. Press the FAN SPEED button to select the
1
ON
fan speed in four steps- Auto, Low, Med,or High.
TEMP.
2
OFF
3
4. Press the ON/OFF button to start the air
FAN SPEED
conditioner.
4
NOTE
SLEEP
AIR DIRECTION CLOCK
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
SWING TIMER
able to control the room temperature either. In this
LED CANCEL
TURBO
case, only step 1, 3 and 4 may be performed.
RESET F/C

Auto operation

O O O O
O
O O O O
O
9

Dehumidifying operation

Carrier
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
DRY
display panel of the indoor unit illuminates.
SET TEMP.
CLOCK 1. Press the MODE button to select DRY mode.
2. Press the TEMP buttons to set the desired
temperature. The temperature can be set
SPEED AUTO
within a range of 17 C(62 F)~ 30 C(88 F) in
MODE
O
1
1 C/2 F increments.
ON
TEMP. 2 3. Press the ON/OFF button to start the air
OFF
conditioner.
FAN SPEED
NOTE
SLEEP
In the Dehumidifying mode, you can not switch
AIR DIRECTION CLOCK
the fan speed. It has already been automatically
SWING TIMER
controlled.
LED CANCEL
TURBO
RESET F/C

Adjusting air flow direction

Use the AIR DIRECTION and SWING buttons to
adjust the Up/Down airflow direction.
1. When press the AIR DIRECTION button, the
horizontal louver will move at an angle of 6 .
Keep pressing the button to move the louver to
Carrier
the desired position.
DRY
2. Press the SWING button , the horizontal
SET TEMP.
CLOCK
louver would swing up/down automatically.
Press it again to stop.
SPEED
AUTO
MODE
NOTE: When the louver swing or move to a
ON
TEMP.
OFF
FAN SPEED
1
SLEEP
AIR DIRECTION
CLOCK
2
SWING
TIMER
LED CANCEL
TURBO
RESET F/C
10
O O O O
O
o
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.