Related Manuals for Evolution Rage3-B
Summary of Contents for Evolution Rage3-B
- Page 1 ® 210mm TCT Multipurpose Compound Mitre Saw Original Instructions Read instructions before operating this tool. www.evolutionbuild.com...
-
Page 2: Table Of Contents
EC - DECLARATION OF CONFORMITY EC - DECLARATION OF CONFORMITY We, manufacturer and importer Evolution Power Tools Ltd. Original Instructions Venture One Sheffield Read instructions before operating this tool. S20 3FR Declare that the product TABLE OF CONTENTS Part numbers:... -
Page 3: Month Limited Warranty
Please read these operating and safety – written or verbal – for saw blades. In no instructions carefully and completely. event shall Evolution Power Tools be liable For your own safety, before using this for loss or damage resulting directly or... - Page 4 5. Store idle tools. When not in use, tools 15. Disconnect tools. Disconnect tools should be stored in a dry locked-up place, from the power supply when not in use, out of children’s reach. before any maintenance operation and 6. Never force the tools. Your tools will be when changing accessories such as more efficient and safer when used at the blades, bits, cutters, etc.
-
Page 5: Safety Instructions For All Saws
HEALTH ADVICE g) Always use blades with correct size and shape (diamond versus round) of WARNING: When drilling, sanding, sawing arbor holes. Blades that do not match the or grinding, dust particles will be produced. mounting hardware of the saw will run In some instances, depending on the eccentrically, causing loss of control. -
Page 6: Labels & Symbols
Lower guard may be retracted manually only for special cuts such as Only use genuine Evolution replacement saw “plunge cuts” and “compound cuts.” blades. Unauthorized blades may be dangerous! Raise lower guard by retracting handle Keep saw blades securely fastened. -
Page 7: Additional Specific Safety Rules
To obtain an additional copy of your manual, tool will draw. An undersized cord will cause a please contact Evolution Power Tools at: drop in line voltage, resulting in loss of power 0870 609 2297 and overheating. -
Page 8: Specification
”) 210mm Bore Diameter (1”) 25.4mm Additional accessories can be obtained by Thickness 1.7mm contacting your local dealer (or Evolution Power Tools). Maximum Cutting Capacity (Wood) At 90º mitre x 90º bevel 120mm x 50mm At 45º mitre x 45º bevel... -
Page 9: Machine Overview
ASSEMBLY MACHINE OVERVIEW ASSEMBLY Your Evolution Power Tools saw is shipped 1. SAFETY RELEASE LEVER complete. Remove all contents from the 2. ON/OFF TRIGGER SWITCH 3. HANDLE box and inspect to ensure no damage was incurred during shipping, and that the items 4. - Page 10 2. Installing or removing the blade Fig 2 WARNING: Only use genuine Evolution blades which are designed for this machine. Ensure that the maximum speed of the blade is compatible with the machine. Note: It is recommended that the operator considers wearing protective gloves when handling the blade during installation or when changing the machines blade.
-
Page 11: Operation
6. Install the new 210 mm (8-1/4”) blade. Make sure the rotation arrow on the blade matches the clockwise rotation arrow on the upper guard. The blade teeth should always point downward at the front of the saw. 7. Install the blade washer and arbor screw. 8. - Page 12 1. Releasing the saw head e) Gently push the saw head down and cut a) Gently press down on the cutting handle. through the workpiece. b) Pull out the head stop latching knob and f) After the cut is completed, turn off the saw allow the head to rise to its upper position.
-
Page 13: Maintenance
7. Compound Cutting A compound cut is a combination of a mitre and bevel cut. a) Select the required mitre angle as previously described. b) Select the required bevel angle as previously described. c) Ensure the tightness of all adjustment/locking screws before making a cut. -
Page 14: Environmental Protection
ENVIRONMENTAL PROTECTION ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. www.evolutionbuild.com... -
Page 15: Service Parts Diagram
SERVICE PARTS DIAGRAM www.evolutionbuild.com... - Page 16 E11103...
Need help?
Do you have a question about the Rage3-B and is the answer not in the manual?
Questions and answers