HP EliteBook 8740W Service Manual page 64

4. Loosen the captive Phillips screw (3) that secures the secondary hard drive carrier to the
computer.
5. Insert a flat-bladed screwdriver or similar tool into the secondary hard drive carrier tab access (4)
and press the tab to the left to release the secondary hard drive carrier from the computer.
6. Remove the secondary hard drive (5).
7. Loosen the captive Phillips screw (1) that secures the secondary hard drive to the secondary
hard drive carrier.
8. Use the Mylar tab to lift the front edge of the secondary hard drive (2) until it rests at an angle.
9. Release the secondary hard drive (3) by sliding it up and forward at an angle.
10. Remove the secondary hard drive.
Reverse this procedure to reassemble and install the secondary hard drive and secondary hard drive
carrier.
56 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals