Allowing An Sra -> Lan Connection - Dell SonicWall SRA 4200/1200 Getting Started Manual

Allowing an SRA -> LAN Connection
When users have connected to the SRA, they need to be able
to connect to resources on the LAN. To allow an SRA to LAN
connection, perform the following steps:
1. Navigate to the Network > Address Objects page.
2. In the 'Address Objects' section, click
3. In the 'Add Address Object' dialog box, create an address
object for the X0 interface IP address of your SRA
appliance:
Name
Zone Assignment
Type
IP Address
4. Click Add to create the object. Once done, click Close.
5. Click again to create an address object for
the NetExtender range.
.
Name for the SRA Appliance
SRA
Host
SRA appliance's 'X0' IP
address, 192.168.200.1 by
default
6. In the 'Add Address Object' dialog box, create an address
object for the X0 interface IP address of the SRA
appliance:
Name
Zone Assignment
Type
Starting IP Address
Ending IP Address
7. Click Add to create the object. Once done, click Close.
8. On the 'Network > Address Objects' page, in the 'Address
Groups' section, click
9. In the 'Add Address Object Group' dialog box, create a
group for the X0 interface IP address of your SRA
appliance and the NetExtender IP range:
• Enter a name for the group.
• In the left column, select the two groups you created and
click the right arrow button
• Click OK to create the group when both objects are in the
right column.
Dell SonicWALL SRA 4200/1200 Getting Started Guide
Name for NetExtender
SRA
Range
Start of the NetExtender
IP address range,
192.168.200.100 by
default
End of the NetExtender
IP address range,
192.168.200.200 by
default
.
.
32