Dell SonicWall SRA 4200/1200 Getting Started Manual page 40

Testing Your Remote Connection
You have now configured your Dell SonicWALL security
appliance and SRA appliance for secure SSL-VPN remote
access.This section provides instructions to verify your
connection using a remote client on the WAN.
Verifying a User Connection from the Internet
1. From a WAN connection outside of your corporate network,
launch a Web browser and enter the following:
https://<WAN_IP_address_of_gateway_device>
2. When prompted, enter the User Name and Password
created in "Adding a Local User" on page 16
3. Select LocalDomain from the drop-down menu and click
Login. The Dell SonicWALL Virtual Office screen appears
in your Web browser.
4.
5.
6.
You have now successfully set up your SRA appliance.
Tip: It is easier for remote users to access the SRA appliance
of this guide.
Click NetExtender to start the NetExtender client
installation.
If prompted, click Install to complete the client installation.
Ping a host on your corporate LAN to verify your remote
connection.
using an a fully qualified domain name (FQDN) rather
than an IP address. It is recommended that you create
a DNS record to allow for FQDN access to your SRA
appliance. If you do not manage your own public DNS
servers, contact your ISP for assistance.
Dell SonicWALL SRA 4200/1200 Getting Started Guide 40