Dell SonicWall SRA 4200/1200 Getting Started Manual page 19

Adding a NetExtender Client Route
NetExtender allows remote clients to have seamless access to
resources on your local network. You can also enable Tunnel All
Mode so that, when NetExtender clients connect, all the traffic
will be tunneled through the NetExtender connection.
To configure a NetExtender client route:
1. Navigate to the NetExtender > Client Routes page.
2. To force all SRA client traffic to pass through the
NetExtender tunnel, select Enabled from the Tunnel All
Mode drop-down list.
3. Click Add Client Route.
4. Enter the IP address of the trusted network to which you
would like to provide access with NetExtender in the
Destination Network field. For example, if you are
connecting to an existing DMZ with the network
192.168.50.0/24 and you want to provide access to your
LAN network 192.168.168.0/24, you would enter
192.168.168.0.
5. Enter your subnet mask in the Subnet Mask field.
6. Click Accept to finish adding this client route.
Dell SonicWALL SRA 4200/1200 Getting Started Guide 19