Dell SonicWall SRA 4200/1200 Getting Started Manual page 17

Configuring SRA Network Settings
You will now configure your SRA 4200/1200 network settings.
Refer to the notes you took in the
page 8 to complete this section.
Configuring DNS / WINS
1. Navigate to the Network > DNS page in the management
interface.
2. Enter a unique name for your SRA appliance in the SSL-
VPN Gateway Hostname field.
3. Enter your Primary DNS Server information.
4. (Optional) Enter a Secondary DNS Server in the
Secondary DNS Server field.
5. (Optional) Enter domain suffixes in the DNS Search List:
a. Type each domain suffix and click Add.
b. Use the up and down arrow keys to arrange the DNS
suffixes in order of priority.
"What You Need to Begin" on
The first suffix in the list is appended to the host name
to create a FQDN, which is used to resolve names. If
the name is not resolved, the next suffix in the list is
used.
3. (Optional) Enter your WINS servers in the Primary WINS
Server and Secondary WINS Server fields.
4. Click Accept.
Configuring the X0 IP Address for Scenario B and
Scenario C
If deploying the SRA in either Scenario B, SRA on an Existing
DMZ or Scenario C, SRA on the LAN as shown in Selecting a
Deployment Scenario section, on page 9, you need to reset the
IP address of the X0 interface on the SRA to an address within
the range of the existing DMZ or the existing LAN.
To configure the X0 IP address for either of these scenarios:
1. Navigate to the Network > Interfaces page.
2. Click the Configure icon for the X0 interface from the
Interfaces table.
Dell SonicWALL SRA 4200/1200 Getting Started Guide 17