Table of Contents
Advertisement
Switch Housing & Light Kit (continued)
www.CasablancaFanCo.com
1.888.227.2178
Tab
Notch
If installing the LED light:
Attach the switch housing cap
Position the notches in the outer rim
Attach the LED assembly to the
to the lower switch housing by
of the globe or no-light cap so they
switch housing by installing
installing two light kit assembly
line up with the tabs on the inside
two light kit assembly screws,
screws, found in the
hardware
rim of the upper switch housing.
found in the
hardware bag,
bag.
Carefully lift the globe or no-light
through the slots, not the screw
cap up as far as it will go, then rotate
holes.
clockwise until it is held tightly in
place by the tabs.
If installing the No-Light Cap:
Skip this step.
16
M8527-01 • 03/11/15 • © 2015 Casablanca Fan Company
Advertisement
Table of Contents
