Casablanca 59153 Owner's Manual page 14

Switch Housing & Light Kit
www.CasablancaFanCo.com
1.888.227.2178
Feed the wire plug through the center Insert the third upper switch housing
Screw two upper switch housing screws
from the hardware bag halfway into hole of the upper switch housing, then screw, found in the hardware bag, into
wrap keyhole slots around the screws and place and then tighten all three screws.
the mounting plate on the bottom of the
twist counterclockwise.
motor housing. It does not matter which
two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the
switch housing fixture falling.
14
M8527-01 • 03/11/15 • © 2015 Casablanca Fan Company