Gigaset C530 IP Manual page 17

e.
Send Connections
INT1
sends calls with
Fixed Line:
4560123
Change
f.
Connection for
outgoing calls:
< IP 1
Back
Instead of a fixed connection, you can also select Sel. at each call. For each call, you can then
select a connection over which the relevant conversation should be established.
As an additional process, you can now launch the connection wizard for each additional handset
registered to the base. For each handset, the following will be displayed consecutively:
Assign connections to handset xxx?
¤
Carry out steps a. to f. (see above) for each registered handset.
Ð
OK
INT 1
>
Save
Assigning an incoming/outgoing connection
The handset displays the outgoing
connection that is currently set for the
handset:
Fixed Line.
¤
To retain setting: Press the display key
§OK§
. The following step is skipped.
¤
To change the setting: Press the display
§Change§
key .
To set the connection/telephone number
that the handset should use for calling:
¤
Press right on the control key
often as required until the desired
connection is displayed (in example
IP 1).
¤
To save settings: Press the display
§Save§
key .
v
as
17