The Linksys PAP2T from ACN has been set-up to Plug-and-Play. All that you need to
do now is to follow the instructions below.
Please do not use the included CD unless advised otherwise by ACN.
Step 1 - Check Contents
First check you have everything you need in the Linksys box as below.
The Linksys PAP2T ATA
Power pack and cable
Ethernet cable (blue).
Step 2 - Connect Telephone
Using your telephone cable, connect your standard DECT (cordless) or
analogue telephone (your home telephone) to the port labelled PHONE 1.
Step 3 - Connect Router
Connect the included blue Ethernet cable to the INTERNET port of the Phone
Adapter. Connect the other end into a free port on your router.
Step 4 - Connect Power
Now connect the included power adapter to the POWER port of the Phone
Adapter. Connect the other end to an electrical outlet.
Look for the Green LEDs
Power LED should be solid green, if not check the power supply
Internet LED should be solid green, if not check for internet connectivity.
Phone 1 LED should be solid green, if not check the telephone is